CR-10

Links

• http://www.cnx-software.com/2017/04/04/creality-cr-10-3d-printer-review-part-1-unboxing-setup-and-first-prints/
• http://www.cnx-software.com/2017/05/05/creality-cr-10-3d-printer-review-part-2-tips-tricks-octoprint-and-craftware/
• http://www.instructables.com/id/Flashing-a-Bootloader-to-the-CR-10/
• http://www.crforums.com/
• http://www.crforums.com/showthread.php/10-Cura-settings

Octoprint USB Error

ftdi_sio ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32

• https://groups.google.com/forum/#!topic/wanhao-printer-3d/1E1Sd33XuPs
• https://www.reddit.com/r/Reprap/comments/5qjv5x/having_a_serial_disconnect_issue_on_ramps_would_a/

Solution for me: Change Micro USB-Cable

• http://www.cnx-software.com/2017/04/27/selecting-a-micro-usb-cable-to-power-development-boards-or-charge-phones/

Webcam

https://github.com/PrusaMK2Users/MK2_Tips_and_Tricks/wiki/OctoPrint-Webcam-Setup

# Raspberry Pi Camera V2, half resolution, video mode, full field of view (4:3 aspect) at 10fps
# Notes: Good compromise between resolution and framerate, recommended for V2
camera_raspi_options="-x 1640 -y 1232 -fps 10 -quality 95"